BALLUFF BCS M18VVN-PSCFAG-S49G
BALLUFF BCS M18VVN-PSCFAG-S49G
| Dimensions | M18x1.0 |
|---|---|
| Connection | Connector, M08x1-S49 |
| Series | Level Sensor |
| Mech. installation condition | Non-flush |
| Sensitivity | media-dependent adjustable |
| Output function | PNP, Normally open (NO) |
| Supply voltage | 10.0…35.0 V |
| Tradename | Smartlevel |
| Additional text | Application notes for water based media: The Smart Level Sensors have been adjusted in the factory for standard applications. With thissetting, the Smart Level Sensors are suitable for detecting water based liquids through glass or plastic walls without any further adjustment. The factory setting can automatically mask out glass or plastic walls(approx. 0.5 mm to 6 mm), and compensates within wide limits for foam, moisture and material build up to the inside and outside of the tank concerned. Specialized applications: The Smart Level Sensors can also be used with water based liquids in hitherto insoluble and critical applications, e.g. with glass or plastic walls thicker than 6 mm. For this purpose, the factory setting can be altered by the user. |
|---|---|
| Approvals / Conformity | CE cULus |
| Basic standard | IEC 60947-5-2 |
| Diagnostic Coverage | 0 % |
| Enclosure Type per IEC 60529 | IP66/IP64 on connector output |
| MTTF | 239 a |
| Polarity reversal protected | Yes |
| Product group | Capacitive Sensor |
| Scope of delivery | 2 nuts |
| Series | Level Sensor |
| Short circuit protected | Yes |
Order-no.: BCS008T
Manufacturer: BALLUFF
SAGATRON-no.: BCS008T
| Connection type | Connector |
|---|---|
| Eff. operating current Ie | 300 mA |
| Electrical version | DC, direct current |
| No-load current max. Io | 20.0 mA |
| Operating voltage UB max. DC [V] | 35.0 V |
| Operating voltage UB min. DC [V] | 10.0 V |
| Rated insulation voltage Ui | 75 V DC |
| Ripple max. (% of Ue) | 10 % |
| Sensitivity | media-dependent adjustable |
| Switching freq. f max. (at Ue) | 2 Hz |
| Switching function | Normally open (NO) |
| Switching output | PNP |
| Voltage drop static max. | 1.8 V |
| Ambient temperature Ta max. | 60 °C |
|---|---|
| Ambient temperature Ta min. | -10 °C |
| Connector type | M08x1-S49 |
| Cover material | PVC |
| Diameter d1 | M18x1.0 |
| Housing material | PVC |
| Mech. installation condition | Non-flush |
| Mounting length | 49.0 mm |
| Sensing face material | PVC |
| Tightening torque | 1 Nm |
