BALLUFF BCS S44KK01-PSCFAG-EP00,3-GS49
BALLUFF BCS S44KK01-PSCFAG-EP00,3-GS49
| Dimensions | M12x1.0 |
|---|---|
| Connection | Cable with connector, PUR, 0.30 m M08x1-S49 |
| Series | Level Sensor |
| Mech. installation condition | nichtbündig |
| Sensitivity | media-dependent adjustable |
| Output function | PNP, Normally open (NO) |
| Supply voltage | 10.0...30.0 V |
| Additional text | Standard applications for water based media: The microLEVEL in Smart Level FSA-Technology have been adjusted in the factory for most applications. With this setting the Smart Level Sensors are suitable for detecting water based media without any further adjustment. The setting compensates within wide limits for foaming,condensation and product filming. Specialized applications: Sensors in Smart Level FSA-Technology can also be used with water based media in until now unsolvedand critical applications. For this purpose,the factory setting can be altered by the user. Adjustment instructions are supplied with the sensor. The push-pull switching outputs must not be connected in parallel. |
|---|---|
| Approvals / Conformity | CE |
| Basic standard | IEC 60947-5-2 |
| Enclosure Type per IEC 60529 | IP67/akt. Fläche: IP68 10bar |
| Function indicator | Yes |
| Polarity reversal protected | Yes |
| Power indicator | Yes |
| Product group | Capacitive Sensor |
| Scope of delivery | 1 nut and 1 o-ring 10x2 |
| Series | Level Sensor |
| Short circuit protected | Yes |
Order-no.: BCS0105
Manufacturer: BALLUFF
SAGATRON-no.: BCS0105
| Connection type | Cable with connector |
|---|---|
| Eff. operating current Ie | 50 mA |
| Eff. operating voltage Ue DC | 24.0 V |
| Electrical version | DC, direct current |
| Load capacitance max. (at Ue) | 10.000 µF |
| No-load current max. Io | 12.0 mA |
| Operating voltage UB max. DC [V] | 30.0 V |
| Operating voltage UB min. DC [V] | 10.0 V |
| Rated insulation voltage Ui | 75 V DC |
| Ripple max. (% of Ue) | 10 % |
| Sensitivity | media-dependent adjustable |
| Switching freq. f max. (at Ue) | 5 Hz |
| Switching function | Normally open (NO) |
| Switching output | PNP |
| Voltage drop static max. | 2.0 V |
| Ambient temperature Ta max. | 105 °C |
|---|---|
| Ambient temperature Ta min. | -5 °C |
| Cable diameter D max. | 4.7 mm |
| Cable jacket material | PUR |
| Cable length L [m] | 0.30 m |
| Connector type | M08x1-S49 |
| Cover material | PA |
| Depth | 62.5 mm |
| Diameter d1 | M12x1.0 |
| Housing material | PEEK |
| Mech. installation condition | nichtbündig |
| Sensing face material | PEEK |
| Storage temperature max. | +80 °C |
| Storage temperature min. | -25 °C |
| Thread (A) | M12x1 |
| Tightening torque | 1.5 Nm |
