PeakTech P 3725 Multi-Funktionstester 3 1/2-digit
Digital Multifunction Tester with advanced design, multiple functions, novel figuration, large display screen and reliable performance. This meter is fully capable to measure voltage and current both AC and DC., resistance, capacitance, inductance, temperature, frequency, diode test, transistor hFE and continuity test, TTL LOGIC level measurement. Some special functions such as holding the measured data and maximum value, displaying polarity, units icons and full overloading protection, automatic power off are the most imported features.
- 3 ½-digit LCD-display (53 x 62 mm) with backlight, max. display 1999
- auto power off
- MAX-, DATA-HOLD
- Manual range selection, low battery indication
- hFE-test, diode- and continuity-test
- Safety: EN 61010-1; CAT III 1000 V
- Accessories: test leads, test-clips, multifunction adaptor, thermocouple, battery and manual
| DCV |
200 mV/2/20/200/1000 V; 100 µV; ± 0,5 % + 1 dgt. |
| ACV |
200 mV/2/20/200/750 V; 100 µV; ± 0,8 % + 3 dgt.
200 mV/2/20/200/750 V; 100 µV; ± 0,8 % + 3 dgt.
freq.-range: 40 - 400 Hz |
| DCA |
20 µA/2/200 mA/10 A; 10 nA; ± 0,8 % + 1 dgt. |
| ACA |
20 µA/2/200 mA/10 A; 10 nA; ± 1,0 % + 3 dgt.
20 µA/2/200 mA/10 A; 10 nA; ± 1,0 % + 3 dgt.
freq.-range: 40 - 400 Hz |
| Ohm |
200 Ω/2/20/200 kΩ/2/20/2000 MΩ; 0,1 Ω; ± 0,8 % + 1 dgt. |
| CAP |
20/200 nF/2/100 µF; 10 pF; ± 2,5 % + 5 dgt. |
| Induct. |
2/20/200 mH/20 H; 1 µH; ± 2,0 % + 10 dgt. |
| Freq. |
2/20/200 kHz/2/10 MHz; 1 Hz; ± 0,1 % + 3 dgt. |
| Temp. |
-40 ... +1000°C; ± 1,0 % + 3 dgt. |
| operating voltage |
9 V-battery |
| dimension (WxHxD) |
195 x 90 x 40 mm |
| weight |
600 g |
Order-no.: P 3725
Manufacturer: PeakTech
